Loading…

READY TO ROCK?

Click the button below to start exploring our website and learn more about our awesome company
Start exploring

Well System 101: How to Fix Low Water Pressure

If the water in your house comes from a well system, you must be familiar with fluctuations in water pressure. Your residential well pump is responsible for supplying water for drinking, laundry, dishwashing, showering, and all other water needs to your home. If you have low water pressure, it can be very frustrating. All residential water-related activities seem to slow down or stop completely when your water pressure drops.

 

So, what can you do to fix the problem? Let’s discuss how to identify and fix low water pressure in your well.

 

Common Causes of Low Water Pressure in Your Well Pump

 

If you’re experiencing low water pressure in your residential well, there are several reasons this can happen. The most common causes of low water pressure include:

 

1.   Clogged Pipes

 

Although this is a severe plumbing issue, you can typically identify it without calling a professional. Still, if you have clogged pipes, you’ll need to call a professional plumber for repairs. Check for issues with your drains, slow toilet flushing, or water backup in your sinks. Many things can block your pipes, so it’s essential to contact a plumber to remove the blockage and help improve your water pressure.

 

2.   Well Pump Issues

 

A worn-out or broken well pump, a clogged well screen, a partially jammed check valve, or brittle or rusted well tubing are some of the common well pump issues you can experience. These well issues can impact your water pressure and call for a professional plumbing service to be fixed.

 

3.   Low Power

 

Your residential well system needs electricity to run efficiently. When you have issues with your power, it can reduce the flow of water to your well, preventing it from functioning efficiently. Check your circuit breaker or call a plumbing professional to check your electrical supply to your well pump.

 

4.   Little or No Water in the Well

 

In some cases, your pump isn’t the cause of low water pressure. Sometimes, low water pressure is caused by a lack of water in your well. This issue is typically accompanied by discolored or foul-tasting water. If you have low water pressure, contact a local plumber to check your water supply.

 

5.   Wrong Pump Size

 

Using the wrong pump size can result in your system cycling excessively or not enough, depending on your needs. You need to have a pump system that accommodates the number of faucets and appliances in your home. Your well pump should also be chosen by the size of your family and the amount of water you use daily.

 

Troubleshooting Your Well Pump

 

Here are some tips for troubleshooting your well pump:

 

  1. Turn off the well pump circuit breaker.
  2. Using an air pressure gauge, check the air fill valve and note where your pressure is.
  3. If the water pressure is equal to or below 40 psi, turn up the pressure switch to increase the pressure. You will find the pressure switch on the pipe that connects the well to the pressure tank.
  4. Open your faucet after the circuit has been turned on to see if water pressure improves.
  5. If required, repeat these procedures to adjust.

 

If you don’t feel comfortable performing these steps on your own, it’s best to contact a professional for help.

Hire a Professional and Licensed Plumbing Company for Your Residential Needs

 

It’s crucial to hire a professional if you need work done on your residential plumbing system. Contact your local Riverside plumber to schedule an appointment for fast and affordable service.

Leave a Reply